Chain Link Fence Installation in Irving, TX

Chain link is the workhorse of Texas fencing. Affordable, long-lasting, and built to handle North Texas weather.

Chain link fence installation Irving TX

Chain link is the workhorse of Texas fencing. It's affordable, it can last 20+ years when it's installed right, and it handles North Texas weather better than just about anything else we put in the ground. We install residential chain link β€” backyards, dog runs, side yards β€” and we also put up heavier commercial-grade chain link for businesses, schools, and industrial properties around Irving.

Why Choose Chain Link

Built to last in Texas weather. 9-gauge galvanized mesh with schedule 40 steel posts. We've pulled chain link fences out of the ground in Irving that were put in back in the 90s, and the steel was still solid. A good chain link fence will usually outlast the homeowner.

Affordable upfront, cheaper long-term. Chain link usually runs about half the cost of a comparable wood fence. And you're not repainting it, restaining it, or replacing boards after they warp. Most chain link fences don't need much of anything for the first 15 years.

Lets the breeze through. This matters in Texas more than people think. A solid privacy fence can turn into a sail when a storm rolls through. Chain link lets the wind pass through it, which is why you'll see it still standing in yards where the wood fence got knocked over.

Pets and kids contained, view kept open. A 6-foot chain link with privacy slats gives you about 70% visual screening and full security. Or you can skip the slats if you still want to see across the yard.

Chain Link Options

Commercial chain link fence Irving TX

Galvanized (silver). The standard chain link. Hot-dipped galvanized steel, the kind most folks picture when they hear "chain link." It's the cheapest option, and it's been around forever. Looks a little industrial, sure, but it does the job.

Black vinyl-coated. Same chain link, but coated in black PVC. It blends into a landscaped yard a lot better β€” your eye catches the trees and grass before it notices the fence. Popular in Las Colinas and Coppell neighborhoods where HOAs allow chain link only if it's black.

Privacy slats. Plastic or aluminum slats that weave through the mesh vertically. They give you privacy without paying for a wood fence or dealing with wood fence maintenance. Available in green, brown, black, and beige.

Heights. 4-foot is standard for front yards and around pools. Most cities, including Irving, require a minimum of 4 feet around residential pools. 6-foot is standard for backyards. 8-foot is common for commercial jobs.

Our Installation Process

  • Step 1 β€” Free quote within 1 hour: Send us a photo of where the fence is going and rough measurements. We'll get you a written quote within an hour. For most jobs, we don't need to come stand in your yard first.
  • Step 2 β€” Utility marking and approvals: Texas law requires an 811 call before any digging β€” utility companies mark the lines within 2 business days. If you're in an HOA neighborhood, most associations require fence approval in writing before work starts. You'll want to have both squared away before the install date.
  • Step 3 β€” Installation (usually 1-2 days): Most residential chain link jobs in Irving take one day. Bigger jobs or commercial runs can take 2-3 days. We dig post holes 24 inches minimum, and every corner and gate post gets set in concrete.
  • Step 4 β€” Walkthrough and cleanup: The owner walks the finished fence with you. We haul off the debris, sweep the work area, and that's it.

Also Serving These Areas

We install chain link fences across the DFW area: Grand Prairie, Las Colinas, Coppell and Carrollton.

Frequently Asked Questions

How much does chain link fence installation cost in Irving, TX?
Cost depends on the fence length, height, gauge of wire and gate requirements. Residential chain link typically runs from $15 to $30 per linear foot installed. Commercial grade with heavier materials costs more. We provide free estimates so you get an accurate quote for your specific job.
How long does chain link fence installation take?
Most residential jobs are completed in one day. Larger commercial projects may take 2–3 days depending on the perimeter size and number of gates.
What gauge chain link is best for a residential yard?
11-gauge is the standard for residential use β€” a good balance of strength and cost. For commercial or industrial applications we recommend 9-gauge with schedule 40 posts for maximum durability.
Do you install cantilever gates in Irving?
Yes. We install both rolling and cantilever slide gates. Cantilever gates are particularly useful when the driveway surface is uneven or when ground-level tracking is not practical. We'll help you choose the right type during the free estimate.
Do I need a permit for a chain link fence in Irving, TX?
In most cases, yes β€” the City of Irving requires a permit for new fence installations over 4 feet, and for any fence in the front yard. Permit info is available through the city's planning department.

Need a Chain Link Fence in Irving?

Call us or send a request β€” we'll schedule your free estimate within 1 hour.

πŸ“ž (972) 255-4537 πŸ“ Irving, TX 75061 πŸ• Mon–Sat 7am–10pm
Get Free Estimate